15dBm Five Band Signal Repeater加长黑

Item No.: 00043
*2G/3G/4G Voice And Data Signal
*Coverage: up to 500 m²
Description Specifications Installation
Description


Model: GW-15-5B

GW-15-5B Solution is suitable for small
Flat which has 2-4 rooms with 60dB Gain,
It can support ultra wide band including 2G,3G,4G.
And improve your cell phone signal level
In mobile communication, it is inevitable that 
macro-cell covere caagnnot cover weak or dead
zones; to use repeater is a good choice in these
areas. These band selective repeaters mainly
applied in covering small blind and weak zones


Advantages:
Smart Function, Intelligent digital mode setting.
Smart function called which can be activated via the front digital panel.
users can adjust gain and choose working band by LED digital panel, This smart function is easier than DIP Switch, 
will set up parameters more fast and more accurate,
It is a simple, safe and effective way.

Product Feature:
Support all 2G,3G,4G bands(5 bands).
Low power consumption, low interference.
Multiple users supported up to 20.
Safety with automatic shutdown function.
Quality metal construction,strong and durable
Good heat dissipation for longevity.
Self-adaptive operating system with powerful CPU
AGC function special for electric fans.
Alarm LED indication.
ALC could limit the output power to ensure stable coverage.
FCC certified.

Specifications

 


Items
Uplink Downlink
Frequency Range LTE17 704 ~ 716 MHz 734 ~ 746 MHz
LTE13 776 ~ 787 MHz 746 ~ 757 MHz
CDMA 824 ~ 849 MHz 869 ~ 894 MHz
AWS 1710 ~ 1755 MHz 2110 ~ 2155 MHz
PCS 1850 ~ 1900 MHz 1930 ~ 1980 MHz
Gain 60± 2dB 60± 2 dB
Output Power  10± 2dBm 15± 2dBm
Ripple LTE17 ≤8 dB ≤8 dB
LTE13 ≤8 dB ≤8 dB
CDMA ≤8 dB ≤8 dB
AWS ≤8 dB ≤8 dB
PCS ≤15 dB ≤15 dB
Max. Input Power Without Damage  -10 dBm -10 dBm
Spurious Emission 9KHz~1GHz ≤-36 dBm ≤-36 dBm
1GHz~12.75GHz ≤-30 dBm ≤-30 dBm
ALC Active 20dB ≤2 dB ≤2 dB
Alarm ALC not Active - Green
ALC Active 5~10dB - Orange
ALC Active 15~20dB - Red
Self-oscillation - Red Flashing(UL OFF)
Time Delay ≤0.5 μs ≤0.5 μs
Power Supply DC:5 V
Power Consumption < 20 W
 RF Connector N-Female
Weight < 2.5kg
Environment Conditions IP40
Humidity < 90%
Operating Temperature  -10ºC ~ +55ºC 


 

Installation

The booster is fixed onto the wall through expansion bolts.
A.  Drill holes on the targeted place and install expansion bolts.
 
B.  Align the holes with the expansion bolts, place flat washers, spring washers, and nuts in turn, and tighten the nuts to fasten the installing support.
C. Place the booster on and fasten it.
 
D. Connect cables and power cables to the booster respectively.
 
E. After installing the booster as described above, power on the booster to check the operation status.
27dBm GSM 900MHz Cell Phone Signal Booster for House (GW-27G)

27dBm GSM 900MHz Cell Phone Signal Booster for House (GW-27G)
Connection
A.  BTS Port: donor antenna cable is connected with Outdoor Port; 
B.  MS Port: service whip antenna is connected with Indoor Port;
C.  DC IN: connected with Power adaptor.
 
27dBm GSM 900MHz Cell Phone Signal Booster for House (GW-27G)



27dBm GSM 900MHz Cell Phone Signal Booster for House (GW-27G)

Send your message to us
ver_code